Progressing Cavity Pump Range
The K Range Progressing Cavity Pump is the core range of Torqueflow-Sydex used for most industrial, petrochemical, chemical, waste water and food applications.
Available in a wide range of materials, including cast iron, stainless steel 304 and 316 through to Duplex steel (SAF 2205 ) when required to suit highly corrosive and difficult applications such as high salinity laden liquids.
Capacity: from 30 l/h up to 300 m 3/h [0.132 usgpm up to 1,320 usgpm]
Pressure: up to 48 bar – [696 psig] upon request.
Stainless steel version:
H Range Progressing Cavity Pump
The H Range Progressing Cavity Pump has been developed for use in the food, pharmaceutical, cosmetics and chemical industries.
H range pumps are constructed in aisi 316 stainless steel, and have been designed to reach the highest hygienic, cleaning and sterilization standards; with optional CIP [clean-in-place] ports to ensure effective cleaning of the pump.
Capacity: up to 50 m 3/h [220 usgpm]
Pressure: up to 24 bar g. [348 psig]
FM Range Progressing Cavity Pump
FM range > Free Moulded Pumps
The FM Range Progressing Cavity Pump series includes 11 models and is available in a wide range of materials, including cast iron, stainless steel 304 and 316 through to Duplex steel (SAF 2205); designed specifically to obtain a compact size pump. The FM series has a floating stator inside the pump’s body, and in this way it’s possible obtain the advantages of a traditional progressive-cavity pump combined with compact dimensions, whilst being very cost effective.
Capacity: up to 10.000 l/h [44 usgpm]
Pressure: up to 4 bar - 58 psig.
Stainless steel version:
Vertical Sump Pump
The highly versatile vertical E range pumps are also known as barrel emptying, Vertical Sump Pump or semi-submersible.
There are numerous applications particularly within the oil & gas, and chemical industry where high suction lifts [low NPSHa] are an issue. The pumps can be directly mounted inside a tank leaving the motor outside of any potentially hazardous and/or corrosive environments.
Other applications include food and beverage as barrel emptying pumps and the transfer of food liquids. Additionally E range pumps have been used as laboratory pumps for the dosing or transfer of chemicals and corrosive liquids.
All pumps can be provided with ATEX certification for hazardous areas.
Available in a wide range of materials, including cast iron, stainless steel 304 and 316 through to Duplex steel (SAF 2205 ) when required to suit highly corrosive and difficult applications such as high salinity laden liquids. Other materials including plastic are available upon request.
Capacity: from 200 l/h up to 150 m 3/h [0.87 usgpm to 660 usgpm]
Pressure: up to 12 bar g [174 psig]