All Products Line Card
This Line Card is a great quick reference for all available Chemineer products. For more detail on a specific product,
please refer to one of the links below.
Chemineer's sanitary mixers offer a variety of design configurations, materials and options needed to meet critical
sanitary mixing applications and ensure the highest level of sanitary mixing. Chemineer also offers a wide variety of
precision-engineered, high-performance impeller options.
Clean Sweep Mixers
The NEW Clean Sweep™ mixer from Chemineer revolutionizes mixing technology by utilizing a swing motion instead of the
customary rotating motion providing a hermetically sealed environment!
Greerco® Colloid Mills are highly efficient, in-line, processing units specifically designed to disperse solids and/or
liquids into a carrying vehicle rapidly and uniformly. Any emulsion or suspension - liquids in liquids or solids in
liquids - can be reproduced repeatedly with unvarying particle-size accuracy and distribution. Greerco Colloid Mills
produce stable emulsions to the submicron range.
DT Top-Entering & Portable Mixers
Direct-drive and gear-reduced designs for both open and closed tank applications are available. Each unit features
Chemineer's renowned reputation for quality that has grown over the past 50 years.
The line of Chemineer GT Turbine Agitators provides enhanced cost-efficiency and performance embodied in an advanced
parallel shaft design.
Kenics® Static Mixer technology, available exclusively in Kenics® Heat Exchangers, offers the highest available
coefficients for fast, uniform heat transfer. Capable of reliable operation in a wide range of process applications,
including those in the polymer, plastic, and food and beverage industries, Kenics Heat Exchangers require less space,
less energy and less residence time than standard designs.
HEV Static Mixers
The patented tab geometry of the Kenics® HEV Static Mixer maximizes the conversion of turbulent energy into efficient
mixing for a variety of line shapes and sizes. The mixing elements take advantage of the naturally occurring vortices
induced by the element edges to produce complete stream uniformity.
Greerco® Homogenizers from Chemineer are high-speed, high-shear batch mixers ideal for fast blending and homogenizing
of materials through a wide range of viscosities.
HS Side-Entering Agitators offer the same ruggedness, dependability and simplicity of design found in our other
high-quality turbine agitators and mixers. At the heart of the HS Agitator is a right-angle drive exclusively
engineered for side-entering agitator service. Chemineer® HS Side-Entering Turbine Agitators work efficiently
when a tank is too large for convenient installation of a top-entering agitator, or where headroom is severely
HT Turbine Agitators have earned a worldwide reputation for long life, flexibility and ruggedness. As a result,
they are the preferred agitators of many industries for harsh, demanding environments where peak performance is
integral. HT Turbine Agitators are robust, simple and designed for ease of maintenance. The Chemineer HTM mixer
is an available option for high torque applications and provides many of the same design benefits as the HT gearbox.
Chemineer’s unique new range of industrial agitators are designed for use with plastic transportable (IBC) containers.
We supply a range of models suitable for a variety of applications including - blending light viscous liquid as well as
re-suspension of settled solids and dissolution of powders. IBC Product Brochure
If there were only one mixing job to do, only one impeller would be required. However, there is a very wide range of
problems in agitation, and the best impeller for one application may not be the best impeller for another. Includes
descriptions and discussions that are intended as a guide for impeller selection.
KM Static Mixers
In all Kenics® KM Series Static Mixers, a patented helical mixing element directs the flow of material radially toward
the pipe walls and back to the center. Additional velocity reversal and flow division results from combining alternating
right- and left-hand elements, thus increasing mixing efficiency. All material is continuously and completely mixed,
eliminating radial gradients in temperature, velocity and material composition.
KMX Static Mixers
For demanding mixing applications, such as those involving fluids with widely disparate viscosities or volume ratios,
the common limiting factor in static mixer design is the allowable mixer length. The Kenics® KMX Static Mixer from
Chemineer, Inc., the latest addition to the market leading Kenics product line, is the superior choice for these
The MD Mixer's modular design, featuring innovative shaft bearing cartridges, allows longer operating runs between
maintenance periods. Routine maintenance and overhauls can be performed without draining the tank or removing the mixer.
Model 20 HT/GT Agitators
The Model 20 HT/GT agitators feature a high-efficiency gearbox designed specifically for agitator service. Models are
available in right angle and parallel shaft configurations. These agitators feature a modular design package with a wide
range of speeds for improved process control and greater application versatility. The Model 20 HT/GT agitators are
designed to meet AGMA, OSHA, ANSI, IEC, DIN, EU and ATEX standards and requirements.
Chemineer has demonstrated that it is possible to provide a mixer designed for agitator service at an economical cost,
backed by over fifty years of design expertise and applications experience. Chemineer’s MID RANGE Mixers combine quality,
durability and economy to supply unbeatable value in mixing equipment for the chemical, water and general processing
industries. The MR agitators are designed to be mounted vertically over open tanks.
NIMIX Mixing Systems
Chemineer designs, manufactures and supplies a unique range of low shear, high solids-loading NIMIX mixing systems.
NIMIX container/mixer systems are used for both the manufacture and transportation of a range of fluids with
applications in chemicals, food and pharmaceutical manufacturing.
Prochem® PB Series Mixers combine the proven features of the MD Series with the advantages of a pillow block bearing
design. You get truly efficient fluid processing plus maximum simplicity of maintenance.
Greerco® Pipeline Mixers are designed for in-line continuous high-speed, high-shear homogenizing, mixing, emulsifying
and rapid dispersing. The Pipeline Mixer offers several mixing heads, each having the ability to handle a range of
The Chemineer QED Plus Mixer combines Quality, Economy and Durability for unbeatable mixing value. QED Plus Mixers are
well-suited for agitator service in chemical processing, petrochemical, pharmaceutical and general industrial applications.
Chemineer's new Quik dis-Connect Tote Mixer has all the features necessary for a tote mixer. Not only does this tote mixer
have a quick disconnect feature, but is also the safest tote mixer on the market with no pinch points. This mixer has many
different options available to meet any process conditions. Tote Mixer Flyer
The WVM mixers consist of a simple wall additive injection point, a pre-distribution tab immediately downstream of the
injection point and banks of trapezoidal shaped mixing elements. The number of banks of mixing elements varies depending
on the mixture quality required for the process. The dimensions, angle of attack and spacing of the trapezoidal mixing
elements varies between the WVM models A, B and C. The pre-distribution tab and the injection point design are the same
for all WVM models.
USA - Europe
30-day "No Risk Trial" Total support for your mixing need 50+ years experience in mixer technology
Industry standard IEC, off-theshelf motors from 0.18 to 1.5kw Features and Benefits Motors: Direct drive.