Solutions for Dosing & Dispensing Pastes and Fluids

Based  on the long term  experience and the success of an Italian metering machine company,
INFINITI® was founded in  2006 and is dedicated to the research and development of mini and
micro pumps and systems for highest  dosing accuracy demands. INFINITI® has teamed up with
Torqueflow-Sydex Limited, based in Hampshire, to provide technical and sales support, along with stock for the UK market.

 

Visit our sister website www.infiniti-dosing.co.uk for detailed information

PDM17
 

These standard pumps can be used for a large variety of fluids and pastes.
Our PDM series are easy to service and come adapted to your needs: heavy
duty or light duty.

 General Technical Information

Light Duty

• Housing materials: Stainless Steel, PP
• Rotor: wear resistant, electro nickel plated
• Stators: Viton®, EPDM, Viton extreme, NBR
• Delivery*: back pressure up to 25 bar
• Suction: priming or max. 3 bar
• Seal: U-shaped with energising spring
• Weight: < 1.35 Kg - Particles: max. 0.5 mm

Heavy Duty

• Housing materials: Stainless Steel
• Rotor: wear resistant, electro nickel plated
• Stators: Viton®, EPDM, Viton extreme, NBR
• Delivery*: back pressure up to 35 bar
• Suction: priming or max. 15 bar
• Seal: double acting energised O-ring
• Weight: < 1.65 Kg - Particles: max. 0.5 mm

 

Technical Characteristics

• Dosing volume between 0.0015 and 0.075 lt./min. (max. 4,5 lt./hr @ 500 rpm for water at 23°C)
• Volume per revolution = 0.15 cc
• Smallest possible shot (dosing quantity) = 0.0075 cc
•  Accuracy: ± 1% or ≥ 99% of volume - Repeatability: ≥ 99%
• Operating Temperature: 10°C to 150°C (depending on chosen Stator)
• Optional: Stepper motor with control and Single Pump Manager; low noise level

NO need for extra valves
NO need for pulsation dampening 
 
*depending on viscosity

 

 

PDM70

These standard pumps can be used for a large variety of fluids and pastes.

            Our PDM series are easy to service and come adapted to your needs: heavy duty or light duty.


 

 

 General Technical Information

Light Duty
• Housing materials: Stainless Steel  Delrin®
• Rotor: wear resistant, electro nickel plated
• Stators: Viton®, EPDM, Viton extreme, NBR
• Delivery*: back pressure up to 25 bar
• Suction: priming or max. 3 bar
• Seal: U-shaped with energising spring
• Weight: < 1.65 Kg - Particles: max. 1.5 mm                                               

                        

Heavy Duty
• Housing materials: Stainless Steel
• Rotor: wear resistant, electro nickel plated
• Stators: Viton®, EPDM, Viton extreme, NBR
• Delivery*: back pressure up to 35 bar
• Suction: priming or max. 15 bar - Seal: double acting energised O-ring
• Weight: < 1.85 Kg - Particles: max. 1.5 mm


Technical Characteristics

 


• Dosing volume between 0.007 and 0.35 lt./min. (max. 21 lt./hr @ 500 rpm for water at 23°C)
•  Volume per revolution = 0.70 cc
• Smallest possible shot (dosing quantity) = 0.035 cc
•  Accuracy: ± 1% or ≥ 99% of volume - Repeatability: ≥ 99%
• Operating Temperature: 10°C to 150°C (depending on chosen Stator) 

•  Optional: Stepper motor with control and Single Pump Manager; low noise level

NO need for extra valves
NO need for pulsation dampening 
*depending on viscosity